Granite Surface,Marble Surface,stone surface
stone surface finishing
Granite Surface,Marble Surface,stone surface,stone surface process,stone surface finishing:Polished surface,Honed surface,Rough-Rubbing surface,Machine-Cut surface,Pickling surface,Bushhammered surface,Picked surface,Chiselled surface,Flamed,Nature Split surface,tumbled,Brushed surface,Water-jet surface,Antique surface,Flamed+ Brushed surface,Pickling Brushed surface,Sandblasted surface,Grooved surface,Mushroom surface.
Common Finishes for Stone
POLISHED High shine. The polish may last a long time or may be unstable depending on the type of stone. Granite, marble and limestone are frequently polished, and require varying degrees of maintenance to preserve the shine.
HONED This satin finish looks very "soft", shows few scratches, and requires very little maintenance. Marble, limestone, and slate are appropriate stones for a honed finish.
ACID-WASHED Shiny with small etching marks (pits in surface). An acid-washed finish shows fewer scratches and is much more rustic in appearance than a honed finish. Most stones can be acid-washed but the most common are marble and limestone. Acid washing is also a way to soften the shine on granite.
SAW-CUT REFINED Matt finish. After initial cutting, the stone is processed to remove the heaviest saw marks but not enough to achieve a "honed" finish. Granite, marble, and limestone can be purchased this way, typically on a special order basis.
FLAMED Rough texture, very abrasive. This finish is used mostly for exterior applications as flooring or as facing on commercial buildings, is labour intensive, and can be costly. The texture is achieved by heating the surface of the stone to extreme temperatures, followed by rapid cooling. Flaming is primarily done to granite.
SPLIT-FACED Rough texture, not as abrasive as flamed. This finish is typically achieved by hand cutting and chiselling at the quarry, exposing the natural cleft of the stone. This finish is primarily done on slate.
TUMBLED Smooth or slightly pitted surface, broken rounded edges and corners. There are several methods used to achieve the tumbled look. 20mm thick tiles can be tumbled in a machine, or 3cm tiles can be tumbled and then split, creating two tiles that are tumbled on one side. Marble and limestone are the primary candidates. for a tumbled finish.
BRUSHED A worn-down look achieved by brushing the surface of the stone, simulating natural wear over time.
Natural Stone common surface finish (Surface Finishing) method
The surface is very smooth, highly polished, with mirror effect, there is a high gloss. Granite, marble and limestone is often polished, and require different maintenance to maintain its luster.
A smooth surface, but the low-grade polished, resulting in diffuse reflection, dull, does not produce mirror effect, no light pollution.
Coarse grinding (Rough-Rubbing):
The surface of a simple finish, the hair cutting board formed during the milling machine-cut patterns can not feel is a very rough matte processing.
Machine cut (Machine-Cut):
Sand directly from the circular saw or a saw cutting machines and other equipment cut into the bridge type, surface more rough, with clear cut lines of machines.
With the acid corrosion of stone surface, so that small traces of corrosion, appearance is more rustic than the polished surface. Most of the stones can be pickling, but the most common are marble and limestone. Pickling is a way to soften the luster of granite.
Lychee (Bushhammered): Surface rough, uneven, is packed with the chisel on the surface of the carved hole, there is an imitation of the long years of drops of water droplets on the rock an effect.
Pineapple (Picked): Litchi processing more than the surface of the rugged, like a pineapple skin in general.
Chop Ax (Chiselled): Also known as longan and you're struck with the stone ax chop on the surface, forming a very dense texture of the strip, and some, like longan skin effect.
Fire (Flamed): A rough surface. This surface is mainly used indoors such as flooring or commercial building finishes, labor costs are higher. After heated to high temperatures and rapidly cooled to form a burning plane. Burning surface is usually granite.
Cracking (Nature Split): Commonly known as a natural surface, the surface roughness, but the fire did not rough. This surface treatment is usually cut by hand or in the mining of natural stone chisel to expose the crack surface.
Tumbling (tumbled): Surface smooth or slightly rough, smooth, and the corner was broken like. There are several ways to achieve the rollover effect. 20 mm, the blocks can be inside the machine rolling, rolling 3 cm tiles can also be handled, and then split into two blocks. Marble and limestone is the material of choice for rollover treatment.
Brushing (Brushed): The surface of old. The process is a scrub stone surface, imitation stone effect of the natural wear and tear.
Corrigan (Water-jet): A direct impact on stone with high-pressure water surface, soft texture stripping composition, forming a unique decorative effect of the hair surface.
Antique (Antique): Imitation stone to use a certain number of years old after the effects of surface processing, typically using an ordinary abrasive brush is antique or antique water treatment, in general antique grinding brush effects and higher cost-effective but also more environmentally friendly.
Fire Antique (Flamed + Brushed): first, antique fire before making process.
Pickling Antique (Pickling + Brushed): first, after doing antique pickling process.
Sandblast (Sandblasted): King Kong with ordinary sand, or sand to replace the high-pressure water to scour the surface of stone, forming a flat surface decorated frosted effect.
Latin Groove (Grooved): In the stone surface to open a certain depth and width of the trench
Mushroom noodles (Mushroom): Generally artificial splitting chisel, effects and natural split similar to, but the stone face of the day was around the depression was the middle of the high protruding shape the status quo ante.